Agfa Jeti Tauro H3300 UV LED hybrid printer family is a solution for larger print service providers (PSPs) as it offers 24×7 productivity and award-winning quality at the lowest inks consumption on a wide range of rigid and flexible materials up to 3.3 m. The UHS (ultra-high speed) model achieves a throughput of 905 sq m/h. Now, Agfa is fully geared up to launch the printer at C!Print 2023, which will take place in Lyon, France, from January 31-Febeuray 2. Agfa can be found at stand 1F24 where the new Jeti Tauro H3300 UHS LED will be shown in a setup with tables, and printing plate media.
Following the earlier introduction of varnish on the HS model, the Agfa UHS model now also comes with varnish printing at a speed of up to 150 sq m/h, offering producers of corrugated cardboard displays the possibility to embellish prints by adding a layer of high-gloss or satin varnish, either applied to the entire surface (flood varnish) or selectively (spot varnish). All models can also use white ink or white primer. The inks on the Jeti printers are GREENGUARD Gold certified.